Engine Alignment
e engine uses a rubber spline hub to which the out drive sha
is attached. is alignment speci cation between the engine and
out drive needs to be checked periodically. It should be checked
a er every 50 hours of operation, or if the vessel has run aground
or hit a submerged object. Alignment should be checked by a Regal
dealer or marine professional, since special tools and procedures are
required.
Engine Removal
In the event the engine or out drive (sometimes referred to as stern
drive) require major service where it needs to be removed, consult
your Regal dealer as they have special training on these procedures.
Engine Checklist Before Each Outing
Every engine option may require di erent checks before each use,
but a general engine checklist is included here as a guide.
Engine/ Stern Drive:
Check the cooling system. Ensure there are no leaks, and that
coolant level is su cient.
Check the fuel pump for operation, and check fuel lines for leaks.
Check engine oil level.
Check power steering uid level.
Check power trim uid.
3-3
To Next Page
Loading...
