6-34
Canvas-Bow
TYPICAL TONNEAU COVER
The optional bow cover (sometimes called a tonneau cover) is used
mainly for mooring purposes and foul weather conditions.
To set it up, fasten the cover starting at the front center snap working
your way around the port and starboard sides. When you reach the aft
section fasten the snaps to the center windshield. Install the pole at
the center of the cover at the designated point which is designed to t
the pole. If equipped, select poles are adjustable.
You may want to purchase an optional storage (mooring) cover. They
can be ordered from your authorized Regal dealer.
https://www.boat-manuals.com/
To Next Page