English10
Positioning and Attaching the Wall Cups
STEP 1
After you have mounted your gate, and you are satisfied with its positioning,
draw a circle on the surface of your doorway or opening around the perimeter
of the (4) rubber feet.
STEP 2
Next, completely remove the gate from the opening by loosening each of the
(4) threaded spindle rods to depressurize the gate.
Your gate is a pressure mounted gate. Therefore, it is not necessary to use the
screw attached wall cups in your door opening if you choose not to. However, if you
are using the gate at the top of the stairs you must use the wall cups. Using the
wall cups will affix your gate more firmly in the doorway or opening.
To Next Page
Loading...
