Regency Fireplace Products Gi29LE

To Next Page

Regency

Gi29LE

Gas Insert

Owners &

Installation Manual

www.regency-re.com

- Do not store or use gasoline or other ammable vapours and liquids in the vicinity of this or any

other appliance.

- WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch: do not use any phone in your building.

Leave the building immediately.

• Immediately call your gas supplier from a neighbour’s phone. Follow the gas supplier’s

instructions.

• If you cannot reach your gas supplier, call the re department.

- Installation and service must be performed by a qualied installer, service agency or the gas supplier.

Warning

Fire or explosion Hazard

failure to follow safety warnings exactly could result in serious

injury, death, or property damage.

MODELS: Gi29LE-NG Natural Gas Gi29LE-LP Propane

920-405a FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4 08.15.22

Installer: Please complete the details on the back cover and

leave this manual with the homeowner.

Homeowner: Please keep these instructions for future

reference.

Tested by:

Certied to/Certié pour : ANSI Z21.88-2019

CSA 2.33-2019

CSA 2.17-2017

Main Page

Need help?

Do you have a question about the Regency Fireplace Products Gi29LE and is the answer not in the manual?

Summary

Owner Information and Safety

Critical Safety Warnings

Crucial safety precautions for installation, operation, and handling.

Remote Control Operation Guide

Instructions for using the Proflame remote control system.

Installation Requirements

General Safety and Fireplace Requirements

Installation must conform to codes and fireplace suitability guidelines.

Fireplace Dimensions and Clearances

Minimum fireplace opening sizes and clearances to combustibles.

Electrical Receptacle Installation

Installation Procedures

Gas Connection and Venting

Procedures for connecting gas supply and venting the appliance.

Restrictor Adjustment

How to adjust the vent restrictor settings for optimal performance.

Conversion and Derating Procedures

Final Installation Checks

Operation

Operating Instructions

Lighting and Shutdown Procedures

Maintenance