Regency Fireplace Products Onyx EX110

To Next Page

Onyx Electric

LED ELECTRIC FIRE RANGE

with Thermostatic Remote Control

Models: Onyx EX110/EX150/EX190

Instructions for Use & Installation

For use in US (United States) and CA (Canada)

IMPORTANT

THE HEATER OUTLET GRILLE BECOMES

VERY HOT WHILE IN OPERATION.

DO NOT COVER THE OUTLET GRILLE OR

ANY PART OF THE APPLIANCE.

For use with 120V 60Hz electricity supply.

Please read these instructions carefully before

installation.

Failure to follow them could result in serious injury.

SAVE THESE INSTRUCTIONS: Leave this manual

with the appliance, they will be needed when

maintenance or servicing is required.

THIS APPLIANCE MUST BE GROUNDED. 04.20.23

920-651

Need help?

Do you have a question about the Regency Fireplace Products Onyx EX110 and is the answer not in the manual?

Summary

Onyx Electric Fireplace

LED Electric Fire Range with Thermostatic Remote Control

Overview of the Onyx electric fireplace models and their remote control features.

Important Safety Warnings

Critical warnings about hot surfaces and not covering the appliance.

Safety Alert Key

Warning and Caution Symbols

Explanation of warning symbols indicating potential hazards and their severity.

Important Usage Instructions

Operating Instructions

Important Health and Safety

Working Surfaces and Fireguards

Safety notes regarding hot surfaces, the need for fireguards, and appliance placement.

Remote Control Operations

App Setup and Controls

Regency Electric App Instructions

Step-by-step guide to connect and control the fireplace via the app.

Troubleshooting Common Issues

Power Outages and Wi-Fi Disruption

Steps to resolve issues arising from power interruptions or loss of Wi-Fi connectivity.

Appliance Troubleshooting

Maintenance Procedures

Installation Preparation

Servicing Requirements

Resetting Safety Controls

Installation Wiring

Wiring Kits and Hard Wiring

Guidance on installing wiring kits and performing hard wiring.

Power Cord Conversion

Plugging in the Power Cord

Instructions on how to connect the power cord to the appliance.

Pre-Installation Steps

Pre-Installation Conversions

Pre-Installation Mounting

Installation Procedures

Framing for Single-Sided Installation

Framing Completion

Completing Single-Sided Installation

Final steps to complete the framing and installation for a single-sided unit.

Completing Three-Sided Installation

Final steps for framing and completing a three-sided unit.

Framing for Two-Sided Installation

Two-Sided Installation (Left;Right)

Instructions for framing the appliance for a two-sided view.

Framing for Corner Views

Two-Sided Corner Installation

Final steps for framing a two-sided corner installation.

Framing for Three-Sided Installation

Three-Sided Installation Framing

Instructions for framing the appliance for a three-sided view.

Accessing the Fuel Bed

Completion of Assembly

Servicing Instructions

Pairing the Remote Control

Step-by-step guide to pair the remote control with the fireplace unit.

Removing Fuel Bed and Panels

Removing Glass Side Panels

Replacing Fuel Bed LEDs

Replacing Flame Effect LEDs

Replacing the Heater

Replacing the Power Unit

Wiring Diagram

Limited Warranty

Warranty Exclusions and Limitations