EasyManua.ls Logo

Regency Fireplace Products P90-NG10 User Manual

Regency Fireplace Products P90-NG10
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MODELS: P90-NG10 Natural Gas P90-LP10 Propane
P90 Zero Clearance Direct Vent Gas Fireplace
Owners &
Installation Manual
www.regency-re.com
- Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or any other
appliance.
- WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch: do not use any phone in your building.
Leave the building immediately.
Immediately call your gas supplier from a neighbour's phone. Follow the gas supplier's
instructions.
• If you cannot reach you gas supplier, call the re department.
- Installation and service must be performed by a qualied installer, service agency or the gas supplier.
WARNING
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly could result in serious
injury, death, or property damage.
REGENCY FIREPLACE PRODUCTS. 6988 Venture St., Delta, BC Canada, V4G 1H4
919-495
06.09.15
Tested by:
Installer: Please complete the details on the back cover
and leave this manual with the homeowner.
Homeowner: Please keep these instructions for future reference.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Regency Fireplace Products P90-NG10 and is the answer not in the manual?

Regency Fireplace Products P90-NG10 Specifications

General IconGeneral
CategoryIndoor Fireplace
Fuel TypeNatural Gas
Efficiency80%
VentingDirect Vent
Ignition SystemElectronic Ignition
Vent TypeDirect Vent
Log MaterialCeramic Fiber
Weight350 lbs

Summary

Regency P90 Fireplace: Overview and Safety

Safety Warnings and Precautions

Crucial warnings regarding fire, explosion, hot glass, and gas leaks.

Specific Installation Requirements

Guidelines for manufactured homes and Massachusetts CO detector regulations.

Installation Procedures

Pre-Installation and Unit Setup

Initial preparation, safety checks, unit assembly, and venting introduction.

Fireplace Placement and Clearances

Unit location, required air spaces, mantel, facing, and hearth clearances.

Venting System Installation

Instructions for installing flex and rigid pipe venting systems and terminations.

Gas System Installation and Conversion

Gas line setup, testing, and conversion from natural gas to propane.

Fireplace Finishing and Accessories

Framing, optional kits, brick panels, log sets, doors, and surrounds installation.

Wiring and Controls Installation

Installing remote controls and understanding wiring diagrams.

Operation and Adjustments

Aeration Adjustment

How to adjust air shutter for optimal flame and prevent carboning.

Operating and Lighting Procedures

Step-by-step guides for safe operation, lighting, shutdown, and initial use.

Normal Operating Sounds

Explanation of common sounds produced by the appliance during operation.

Maintenance and Parts

General Maintenance and Venting Inspection

Routine cleaning, burner checks, and semi-annual vent inspection.

Component Maintenance and Replacement

Procedures for fan maintenance and valve removal/installation.

Parts List

Comprehensive list of fireplace components and accessories.

Warranty and Registration

Limited Lifetime Warranty Details

Explanation of warranty coverage, terms, conditions, and exclusions.

Warranty Registration

Information and instructions for registering the product warranty online.

Related product manuals