Regency 400 Series - Placing a Call from Speed Dial Memory Location

User’s Guide
Using the Features and Options
8
Regency™ Series 400 Single Line Caller ID Telephone
User’s Guide
Installing the Telephone
Regency™ Series 400 Single Line Caller ID Telephone
27
Installation is completed
The following information will be displayed on the LCD (after
going on-hook) when the installation is complete.
Placing a Call from Speed Dial Location:
1 Lift the handset.
2 Press the DIRECTORY / STORE
key.
3 Press the UP / DOWN key to
locate the name or number’s
memory location (i.e. MEM1,
MEM2, etc.). The number will
be displayed on the LCD
display.
4 If needed, add (or delete) any
digits to the number by
pressing the dialing keypad (or
the delete key, respectively).
5 Press the DIAL key and the number will be dialed.