User’s Guide
Getting to know the Features
34
Regency™ Series 400 Single Line Caller ID Telephone
User’s Guide
LCD Display Information
Regency™ Series 400 Single Line Caller ID Telephone
1
The FEATURES of this telephone are:
• Single line
• Large, backlit, contrast adjustable, LCD display shows:
• Caller ID information
• Date and Time
• Dialing Verification
• Elapsed Call Timer
• Functional Icons
• *Caller ID feature – Type II with 60 memory, up / down scroll,
and direct call back
• 10 Speed Dial memory locations with directory display and
dial out
• Interactive caller log editing for storing memory
• *Visual message waiting indication – ClassSM compatible
• * One touch message retrieval feature
• Interactive directory and storage feature
• Electronic hold with a back-lit indicator
• In-use line status indicator
• Tone or Pulse dialing
• Ringer volume control
• Convenient data port
Caller Log Call Back Dialing Feature:
Adding or Deleting Characters on the LCD Display
Numbers in the caller log can be edited before dialing. When
editing a number to be dialed, the caller log will not remove the
information already stored. To delete one or more digits from the
caller log, you must first press a digit or add a character from the
keypad to activate delete.
To add digits to the displayed number:
1 Press the UP or DOWN key to activate the display for scrolling.
2 Scroll the UP or DOWN key to find the number to be dialed.
3 If you need to add a number prior to the numeric string on
the display, press the keypad number you require and it will
be placed on the display for dialing.
4 Lift handset.
5 Press the DIAL key to dial the number.
Note: The number can only be inserted prior to the displayed
digits. See Delete Characters for improperly inserted characters.
To delete digits from the displayed
number:
Press the UP or DOWN key to activate
the display for scrolling.
1 Scroll the UP or DOWN key to find
the number to be dialed.
Caller ID/LCD DIsplay continued on next page
To Next Page
Loading...