10
This receiver provides the following protective function:
1. Lock Rotor Position: The DC motor has a built-in safety against a stalled or locked rotor condition (stalled blade
rotation). If there is an obstruction or fault with the motor, the current monitoring function will automatically turn
power off to the motor after 30 seconds. Remove the obstruction and select speed function again to re-start fan motor.
Note: When re-programming the fan or if safety is activated because of an obstruction, fan blades may rotated back
and forth during startup. This may continue for a brief time because safety is checking current to the motor for
proper function. This testing can take up to 1 minute and 30 seconds depending on issue. After this period of time
the fan should resume normal mode.
2. Over 80W protection: When the receiver detects motor power consumption which is greater than 80W, the
receiver power will be stopped and operation will immediately discontinue. Wait for 5 seconds and then turn the
receiver power back on.
Speed settings for warm or cold weather depend on factors such as room size, ceiling height and number of fans.
NOTE: To operate the reverse function on this fan, press the button while the fan is running.
Warm Weather (forward):
A DOWNWARD airflow creates a cooling effect as shown in Figure 1. This allows you to set your air conditioner on a
warmer setting without affecting your comfort.
Cool Weather (Reverse):
An UPWARD airflow moves warmer air off the ceiling area as shown in Figure 2. This allows you to set your heating
unit on a cooler setting without affecting your comfort.
Fig. 1 Fig. 2
To Next Page
Loading...
