EasyManua.ls Logo

Rehau RAUTHERM SPEED HKV-D P User Manual

Rehau RAUTHERM SPEED HKV-D P
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RAUTHERM SPEED HKV-D P
DE Montageanleitung
EN Installation Instructions
FR Notice de montage
IT Istruzioni di montaggio
ES Instrucciones de montaje
* Des solutions polymères à l’infini

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Rehau RAUTHERM SPEED HKV-D P and is the answer not in the manual?

Rehau RAUTHERM SPEED HKV-D P Specifications

General IconGeneral
BrandRehau
ModelRAUTHERM SPEED HKV-D P
CategoryControl Unit
LanguageEnglish

Summary

Scope of Delivery and Use

Scope of Delivery

Details the components included in the package.

Intended Use

Explains the purpose and application of the product.

Information and Safety Instructions

Pictograms and Logos

Explains icons and symbols used throughout the manual.

Applicability of Operating Instructions

Guidance on checking for and obtaining updated user manuals.

Safety Instructions and Operating Instructions

Emphasizes reading and following all safety information before assembly.

Prerequisites for Personnel

Specifies that installation must be done by authorized and trained personnel.

General Precautions

Outlines general safety measures for the workspace and personnel.

Working Clothes

Recommends appropriate personal protective equipment for installation work.

Installation Note

Provides specific advice regarding O-ring connections during installation.

Installation

3.1 Repositioning Main Connection from Left to Right

Instructions for changing the main connection direction.

3.2 Repositioning Main Connection from Below to Side

Instructions for changing the connection from bottom to side.

3.3 Pipe Connection for Heating Circuit

General steps for connecting pipes to the heating circuit.

3.3.1 Speed Connector Connection

Detailed steps for connecting the Speed Connector.

RAUTHERM HKV-D P Eurocone Connection Compression Fitting

Instructions for connecting using compression fittings.

3.4 Extension of a Heating Circuit

Steps to add an extension circuit module.

Assembly and Hydraulic Setting

4.1 Wall Mount

Steps for mounting the manifold to a wall.

4.2 Installation in Manifold Cabinet

Steps for installing the manifold in a cabinet.

4.3.1 Filling, Flushing, Venting

Procedures for filling, flushing, and venting the system.

4.4 Setting Flow Rate Values (Hydraulic Calibration)

How to adjust flow rates for proper system balance.

Pressure Loss Diagram