6
4 – INSTALLATION:
4.1
Caution:
Refer all installation and servicing of your rear-view camera system to authorized service
personnel.
The manufacturer does not take responsibility for installations made by unauthorized and
unqualified service personnel.
4.2 Warning:
Read all instructions carefully before mounting the system.
It is essential that your mount is properly grounded for user’s safety and preserving device
durability.
Use only parts, accessories and original cables supplied by REI of Brazil.
The 7” TFT LCD Monitor mounting brackets are suitable for panels and can be fitted or used
in pedestal.
The mounting level surface must be flat and bigger than the mounting brackets that will be
fixed in the vehicle.
The location where the pedestal will be placed must be clean.
Do not install this rear-view camera system where it may obstruct the driver’s vision.
For safe driving reasons, this system should never be used while the vehicle is being driven.
To avoid the risk of accident, do not use any entertainment features in this system that can
divert the driver’s attention.
4.3 Fastening:
The 7” TFT LCD Monitor mounting brackets are already included in the packaging.
There are two fastening methods for this monitor, choose the appropriated option to
guarantee stability and the system does not obstruct the driver’s vision.
Fitted
: This method allows the monitor to be fitted in the vehicle’s panel giving it a
perfect finish.
Stand
: This method allows a surface finish installation with height adjustable and
angle adjustable monitor. Within this installation, it is not necessary to drill a hole or
cutting the panel.
To Next Page
Loading...