TECHNICAL SPECIFICATIONS
Rating for 120V Chair
This equipment is rated Class I, Type B
Equipment Model
Procedure Chair 2000
Volts Hertz Amps
120V 60 2.7
Class I Type B
(ETL)
Rating for 230V Chair
This equipment is rated Class I, Type B
Equipment Model
Procedure Chair 2000
Volts Hertz Amps
230V 50 1.5
Class I Type B
(ETL)
IMPORTANT USER WARNINGS
WARNING- EXPLOSION HAZARD. THIS
EQUIPMENT MUST NOT BE USED IN THE
PRESENCE OF FLAMMABLE ANESTHETICS.
AVERTISSEMENT : RISQUE D’EXPLOSION.
CET ÉQUIPEMENT NE DOIT PAS ÊTRE UTILISÉ
EN PRÉSENCE D’ANESTHÉSIQUES INFLAM-
MABLES.
POTENTIAL ELECTROMAGNETIC or OTHER
INTERFERENCE
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to other
devices in the vicinity. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to other
devices, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving device.
• Increase the separation between the equipment.
• Connect the equipment into an outlet on a circuit different
from that to which the other device(s) are connected.
• Consult the manufacturer or eld service technician for
help.
Safe Working Load: 450 lbs.
IN-20006
To Next Page
Loading...
