What to do if my ReliOn 6021REL Blood Pressure Monitor displays abnormal unit function?
If your ReliOn Blood Pressure Monitor displays abnormal function, it requires professional repair service. Please refer to the “Warranty” information for guidance.
What to do if the cuff over-inflated on ReliOn Blood Pressure Monitor?
If the cuff of your ReliOn Blood Pressure Monitor over-inflates, remove the monitor from your wrist, consult the section on “Applying the Wrist Cuff”, wait 2-3 minutes, and then take another measurement.
What to do if there is movement during measurement with ReliOn 6021REL Blood Pressure Monitor?
If your ReliOn Blood Pressure Monitor displays an error due to movement during measurement, press the ON/OFF START button to turn the unit off, remove the monitor from your wrist, refer to the “Taking a Measurement” section, wait 2-3 minutes, and then take another measurement.
What to do if the cuff is not wrapped securely on ReliOn Blood Pressure Monitor?
If the cuff is not wrapped securely on your ReliOn Blood Pressure Monitor, remove the monitor from your wrist, read the section “Applying the Wrist Cuff”, wait 2-3 minutes, and then take another measurement.
How to replace worn batteries in ReliOn 6021REL Blood Pressure Monitor?
If the batteries in your ReliOn Blood Pressure Monitor are worn, replace them with two new “AAA” batteries. Refer to the “Battery Installation” section for instructions.
Explains the meaning of warning and caution symbols used throughout the manual.
Provides essential guidelines and precautions for operating the blood pressure monitor safely.
Specific steps for applying the cuff to the left wrist.
Instructions for applying the cuff to the right wrist.
Lists common error symbols, their causes, and recommended corrections.
Provides solutions for common operational problems like no power or inaccurate readings.
General| Brand | ReliOn |
|---|---|
| Model | 6021REL |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page
