What to do if my ReliOn BP300W Blood Pressure Monitor has no power?
If your ReliOn Blood Pressure Monitor has no power and the display is blank, replace both batteries with new ones at the same time. Also, check that the batteries are installed correctly, paying attention to the proper placement of the battery polarities.
General| Brand | ReliOn |
|---|---|
| Model | BP300W |
| Measurement Method | Oscillometric |
| Display | LCD |
| Cuff Size | Standard |
| Memory | Yes |
| User Interface | Buttons |
| Irregular Heartbeat Detection | Yes |
| Hypertension Indicator | Yes |
| Type | Upper Arm |
| Cuff Size Range | 22-42 cm |
| Power Source | 4 AA batteries |
| Pulse Rate Range | 40-180 beats per minute |
| Accuracy Pressure | ±3 mmHg |
| Accuracy Pulse | ±5% |
| Memory Capacity | 60 readings |
| Automatic Shut-off | Yes |
Specifies the device is for measuring blood pressure and pulse rate in adult patients and detects irregular heartbeats.
Advises consulting a physician, avoiding self-diagnosis, and following basic safety measures for general operation.
Step-by-step instructions for installing 2 'AAA' batteries correctly.
Instructions for applying the wrist cuff on the left wrist, including sleeve rolling and cuff placement relative to the palm.
Guidance on monitor height relative to the heart, using positioning indicators, and interpreting symbols.
Details the inflation, heartbeat detection, remaining still, and turning off the device after measurement completion.
Provides solutions for common issues like 'No power' or inaccurate readings, referencing other sections for guidance.
To Next Page
