17
TAKING A MEASUREMENT
4. Press the Start/Stop button to turn the monitor off.
NOTES: • The monitor will automatically turn off after 2
minutes.
• Wait 2-3 minutes between measurements. The wait
time allows the arteries to return to the condition
prior to taking the blood pressure measurement.
You may need to increase the
wait time depending on
your individual physiological characteristics.
INFLATE DEFLATE COMPLETESTART
The monitor is in
proper position.
The monitor is higher
than the heart and
needs to be lowered.
The monitor is lower
than the heart and needs
to be raised.
TM
As the cuff inflates, the monitor automatically determines your ideal inflation
level. This monitor detects your blood pressure and pulse rate during inflation.
The Heartbeat Symbol ( ) flashes at every heartbeat.
Remain still and do not move until the entire measurement process is completed.
To Next Page
Loading...
Need help?
General
