Why are my ReliOn 7100REL Blood Pressure Monitor measurement values too high or too low?
Blood pressure naturally varies. Stress, time of day, and how you wrap the cuff can all affect your blood pressure readings. Please review the 'Before Taking a Measurement' and 'Taking a Measurement' sections for detailed instructions.
What to do if my ReliOn 7100REL Blood Pressure Monitor has no power and no display appears?
If your ReliOn Blood Pressure Monitor isn't turning on, replace all four batteries with new ones. Also, double-check that the batteries are installed correctly, paying attention to the polarities.
What to do if the ReliOn Blood Pressure Monitor cuff is under-inflated or not applied correctly?
If the cuff seems under-inflated or you suspect it's not applied correctly, remove the arm cuff and carefully read the 'Taking a Measurement' section of the manual. Then, try taking another measurement.
What to do if ReliOn Blood Pressure Monitor cuff is over-inflated?
If the cuff over-inflates, remove it. Read the 'Taking a Measurement' section and take another measurement, being careful not to inflate the cuff above 299 mmHg.
How to replace worn batteries in ReliOn 7100REL?
If the batteries in your ReliOn Blood Pressure Monitor are worn, replace all four of them. Refer to the 'Battery Installation' section for instructions.
Provides initial safety guidelines and warnings for operating the blood pressure monitor.
Details specific warnings for device use, battery type, disposal, and avoiding interference.
Essential instructions for maintaining the monitor's condition and preventing damage.
Detailed instructions for correctly applying the arm cuff to the left arm.
Guides the user through the process of taking a blood pressure measurement.
Lists common error symbols and their potential causes.
Offers solutions for issues like no power or inaccurate readings.
General| Brand | ReliOn |
|---|---|
| Model | 7100REL |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page
