ReliOn BP300W User Manual

13
SETTING THE DATE AND TIME
Set the monitor to the correct date and time before taking a measurement for the first
time or after replacing the batteries.
The year can be set between 2015 and 2045.
When the display reaches 2045, it will return to 2015.
Repeat the same steps to change the month, day, hour, and minute.
4. After setting the correct minute , press the button to confirm
the date and time setting and start to set the positioning indicator.
NOTE: Refer to the “Setting the Positioning Indicator” to set the positioning
indicator.
1. Press and hold the button until the year flashes on the display.
3. Press the button to confirm the year and then the month flashes.
2. Press the button to advance by one year.
NOTE: Press and hold the button to increase the date and time values faster.
Confirm
Year
Month
Day
Hour
Minute
Change
Confirm Change
Confirm Change
Confirm Change
TM
TM

ReliOn BP300W Specifications

General

Brand	ReliOn
Model	BP300W
Measurement Method	Oscillometric
Display	LCD
Cuff Size	Standard
Memory	Yes
User Interface	Buttons
Irregular Heartbeat Detection	Yes
Hypertension Indicator	Yes
Type	Upper Arm
Cuff Size Range	22-42 cm
Power Source	4 AA batteries
Pulse Rate Range	40-180 beats per minute
Accuracy Pressure	±3 mmHg
Accuracy Pulse	±5%
Memory Capacity	60 readings
Automatic Shut-off	Yes