12
1. Press the indicator on two sides of the battery cover
and slide the cover off in the direction of the arrow.
2. Install 2 “AAA” size batteries so the + (positive) and
- (negative) polarities match the polarities of the battery
compartment as indicated.
3. Replace the battery cover.
NOTES: • When the depleted battery symbol ( ) appears on the display, turn
the monitor off, then replace all batteries at the same time. Long life
alkaline batteries are recommended.
• Turn the unit off before replacing the batteries. If the batteries are removed
while the unit is still on, the date and time will be reset to that of the
previous use. The measurement values are not deleted.
• When the batteries are replaced, you may need to reset the date and time. If
“-:--” appears on the display, refer to “Setting the Date and Time”.
• The batteries included with the device may have a shorter life.
BATTERY INSTALLATION
To Next Page
Loading...
Need help?
General
