USING THE AC ADAPTER
Do not plug or unplug the power cord into the electrical outlet with
wet hands.
Do not overload power outlets. Plug the device into the appropriate
voltage outlet.
1. Insert the AC Adapter Plug into the
AC Adapter Jack on the right side
of the monitor as illustrated.
2. Plug the AC Adapter into a 120V
AC outlet (60 cycles).
1. Hold and pull the Housing to remove the AC Adapter from the electrical
outlet. Do not remove by pulling the cord.
2. Remove the AC Adapter plug from the monitor.
TO CONNECT THE AC ADAPTER
TO DISCONNECT THE AC ADAPTER
WARNING
WARNING
Housing
Cord
11
To Next Page
Loading...
