TAKING A MEASUREMENT
15
4. Inflation stops and the measurement is started.
As the cuff deflates, decreasing
numbers appear on the display. The
Heart Symbol ( ) flashes at
every heartbeat.
NOTE: If the re-inflation symbol
appears, squeeze the inflation
bulb to re-inflate the arm cuff.
5. When the Deflation Symbol ( ) appears on the display, press the
Air Release Button to release the air left in the cuff.
6. The measurement is complete, the Heart Symbol ( ) stops flashing
and your blood pressure and pulse rate are displayed.
7.
Press the ON/OFF button to turn the monitor off.
NOTE: The monitor will automatically turn off after five minutes.
Systolic Blood
Pressure
Diastolic Blood
Pressure
Pulse Display
412CRELN2 IM.tif 1/23/06 9:23 AM Page 15
To Next Page
Loading...
