How to fix a blank display on ReliOn PREMIER CLASSIC Blood Glucose Meter?
To resolve a blank display on your ReliOn Blood Glucose Meter after inserting a test strip: * Ensure the test strip is inserted with the contact bars facing up. * Confirm the test strip is fully inserted into the test strip port. * Verify you are using the correct test strip. * Check that the batteries are correctly inserted. * Try replacing the batteries.
What to do if ReliOn PREMIER CLASSIC Blood Glucose Meter test result does not match the way you feel?
If your ReliOn Blood Glucose Meter test result doesn't align with how you feel, first, repeat the test using a new test strip. Also, verify that the test strip is still within its validity period. If concerns persist, perform a control solution test.
Why does ReliOn Blood Glucose Meter test not start after applying blood?
If the ReliOn Blood Glucose Meter test doesn't initiate after applying a blood sample, ensure the confirmation window is adequately filled. If the issue persists, repeat the test using a new test strip.
General| Display Type | LCD |
|---|---|
| Test Time | 5 seconds |
| Sample Size | 0.5 microliters |
| Operating Humidity | 10-90% RH |
| Automatic Shutoff | Yes (2 minutes) |
| Measurement Range | 20-600 mg/dL |
| Operating Temperature | 50-104°F (10-40°C) |
| Memory | 500 test results with date and time |
Details the intended purpose and scope of the ReliOn™ Premier Classic Blood Glucose Monitoring System.
Provides essential safety warnings regarding single-patient use and sharing of the meter and lancing device.
Highlights crucial safety precautions related to the use and handling of blood glucose test strips.
Warns against foreign substances, direct sample application to the port, and unsanitary storage of the meter.
Guides users through the process of setting the date, time, and audio alerts on the glucose meter.
Explains how to enable and configure the meter's hypoglycemia alert feature.
Details the procedure for setting the specific blood glucose level that triggers the hypoglycemia alert.
Advises consulting a healthcare professional before setting the personal hypoglycemia level.
Describes how to perform control solution tests to verify meter and strip functionality.
Provides step-by-step instructions on how to correctly insert a test strip into the blood glucose meter.
Details the procedure for obtaining a blood drop from the finger using the lancing device.
Guides on applying the correct amount of blood to the test strip for accurate measurement.
Explains the 'HI' message indicating high blood glucose levels and the recommended action.
Explains the 'Lo' message indicating low blood glucose levels and the recommended action.
Explains common error codes 'Er1' through 'Er4' and their corresponding solutions.
Details the 'Er5' error, often related to using the wrong test strip, and its resolution.
Addresses common problems like a blank display or the meter not starting after test strip insertion.
Provides steps to resolve issues where test results do not match the user's perceived condition.
To Next Page
