What to do if my ReliOn Confirm Blood Glucose Meter shows an error code?
If your ReliOn Blood Glucose Meter is damaged or displaying an error code, it is recommended to contact Customer Service at 800.631.0076 for assistance.
Why are my ReliOn Confirm Blood Glucose Meter test results out-of-range?
If your ReliOn Blood Glucose Meter test result is out-of-range, ensure that the test strips and control solutions are not past their expiration date, which is printed on the bottle. Also, make sure the bottles haven't been opened for more than three months.
What to do if my ReliOn Confirm Blood Glucose Meter test strips were not stored correctly?
If the test strips were not stored correctly, retest using a new bottle of test strips to ensure accurate results with your ReliOn Blood Glucose Meter.
What to do if my ReliOn Confirm Blood Glucose Meter test result is out-of-range because of mismatched codes?
If your ReliOn Blood Glucose Meter test result is out-of-range due to mismatched codes, you will need to obtain a new bottle of test strips.
What to do if test strip is not firmly inserted into my ReliOn Confirm Blood Glucose Meter?
Ensure the test strip is fully inserted into the test strip port of your ReliOn Blood Glucose Meter. For visual guidance, refer to the diagram on page 26.
General| Measurement Range | 20-600 mg/dL |
|---|---|
| Test Time | 5 seconds |
| Memory | 450 test results |
| Display | LCD |
| Operating Temperature | 50-104°F (10-40°C) |
| Operating Humidity | 10-90% RH |
| Hematocrit Range | 30-55% |
| Power Source | One CR2032 battery |
| Sample Size | 0.5 µL |
Configures audible beep volume for meter notifications and alerts.
Sets the current year for accurate record-keeping and time-stamping.
Sets the current month for accurate record-keeping and time-stamping.
Sets the current day for accurate record-keeping and time-stamping.
Sets the current hour for accurate record-keeping and time-stamping.
Sets the current minute for accurate record-keeping and time-stamping.
Configures the meter to calculate and display average glucose results.
Finalizes the meter setup process and exits the configuration mode.
Details the components and operation of the lancing device used to obtain blood samples.
Provides instructions on how to prepare and obtain a blood sample for testing.
Guides users through the process of performing a blood glucose test using the meter and strips.
Provides critical details regarding the differences and considerations for alternate site testing.
Details the steps for preparing to conduct a blood glucose test at an alternate site.
Outlines the step-by-step process for conducting a blood glucose test at an alternate site.
Provides instructions on how to prepare for comparing meter results with lab results.
Details procedures and considerations for blood sample collection at a laboratory.
Lists the expected blood glucose levels for adults without diabetes.
Describes symptoms and actions for high blood glucose readings.
Describes symptoms and actions for low blood glucose readings.
Presents findings from a study on diabetes control and complications.
Explains the significance of frequent blood glucose testing for diabetes management.
Provides advice on determining the appropriate frequency for blood glucose testing.
Explains the procedure for clearing all stored test results from the meter's memory.
Provides instructions on how to properly clean the blood glucose meter.
Details guidelines for storing and handling the meter and test strips to ensure accuracy.
Explains the meter's display screen and common error messages.
Lists the technical specifications and features of the ReliOn Confirm blood glucose meter.
Outlines important warnings, precautions, and limitations for using the blood glucose meter.
To Next Page
