Rellorus HCF003 - Assembling Your Pet Feeder; Opening Lid and Initial Setup; Attaching Bowl Holders and Bowls; Final Assembly Steps

0403
Assembling Your Pet Feeder
1
2
Press lock buckle to open lid. Take out all accessories and remove all packing materials.
1
Align the notches and snap the right holder into the left one.
4
Place bowls in bowl holders. Lift feeder and attach the bowls to the notch underneath
the base.
5
Take desiccant bag out from packaging, open desiccant box and place it in. Put the lid
back on.
6
Plug in DC cable. Install 3 D batteries (not included) for back-up power in case of a
power outage.
2
Align the notches and snap splitter into the left bowl holder.
3
1
2
1
2
X2