QUICK START GUIDE
ENGLISH
1 Version 1.0
The BeatMix 4 is a designated controller for
Serato and is a class compliant USB plug and
play device for Mac and PC.
To get it set up, simply connect your laptop to
the BeatMix using the USB cable supplied.
Connect your BeatMix to your sound system
using RCA (unbalanced) cables.
Connect your headphones (either 3.5 mm or
6.3 mm jack) to the front panel socket.
Make sure the volume is low when rst
connecting, then increase the volume slowly.
SPEAKERS
USB CABLE
HEADPHONES
RCA
QSG_Beatmix_4.indd 1 17.12.2013 13:49:13
To Next Page
Need help?
General
