To Next PageTo Next Page
Need help?Do you have a question about the Reloop FLUX and is the answer not in the manual?
General| Audio Interface | Yes |
|---|---|
| MIDI Ports | No |
| Bit Rate | 24-bit |
| USB | USB 2.0 |
| Software | Serato DJ Pro (License Included) |
| USB Ports | 1x USB-B |
| Sample Rate | 48 kHz |
| Headphone Output | 1x (6.3 mm Jack) |
Details important safety guidelines for handling the device, preventing electrical shock, and avoiding damage.
Explains the device's compliance with regulations and the risks associated with unauthorized modifications or improper use.
Outlines regular checks for damage to cables and casing, and procedures for safe disconnection and care.
Details the input and output jacks, status LEDs, and other controls located on the front of the FLUX interface.
Describes the ports and connections available on the rear of the device, including USB and power inputs.
Explains the meaning of status LEDs and how to use the Thru function for direct signal routing.
Details the functionality of the USB hubs and the USB-C PD power delivery features.
Instructions for connecting turntables, CD players, and mixers to the FLUX's inputs and outputs.
Steps for establishing a connection between the FLUX and your computer via USB-C.
Explains how the FLUX is powered, including options for external power and USB-C PD.
Information on the included Serato DJ Pro license and software activation process.
Step-by-step guide for updating the device firmware for both macOS and Windows operating systems.
Comprehensive details on power requirements, audio performance, USB capabilities, dimensions, and accessories.
Guidance on how to obtain technical support through FAQs and support tickets.
