Installation and Setup
The Reloop NEON is a class compliant USB plug and play device and
requires no further driver installation.
NOTE: The Reloop NEON is an additional controller that will only work
in addition to supported Serato DJ hardware. Click here to see a list of
supported Serato DJ hardware.
1. Download and install the latest version of Serato DJ from http://serato.
com/dj/downloads
2. Connect your supported Serato DJ hardware to a USB port.
3. Connect your Reloop NEON to an available USB Port.
4. Open Serato DJ.
To Next Page
Loading...
