Reloop RMP-3 User Manual

ENGLISH
52
TROUBELSHOOTING
If you should encounter any kind of trouble with the RMP-3 please check the following chart for the
corrersponding symptoms and follow the instructions that are listed.
Symptoms
• No power when activating the power ON/OFF switch.
• The CD replay does not start.
• No sound.
• CD skips.
• Humming sound.
Possible cause
• Poor mains plug connection.
• The CD is upside down in the tray or it is soiled.
• Output cable is wrong or not correctly connected, wrong amplier or mixing console operation.
• The CD player is continuously exposed to vibrations and shocks for longer than 20 seconds.
• Loose cable connections.
Corrective Measures
• Check the mains plug connection.
• Insert the CD with the label showing upwards.
• Check the output cords‘ connections and the settings of your amplier and mixer respectively.
• Install your system in another location.
• Check all sound plugs.
TECHNICAL INFORMATION
GlobalDistributionGmbHdidnotcheckthefollowingmanufacturer‘sdataforplausibilityandaccuracy:
Frequencyresponse: CD:17Hz-20kHz/USB:17Hz–16kHz
Channelseparation: 85dB
S/Nratio:  90dB
D/Aconverter:  8-fold/1Bit
MP3Formats:  MPEG1Layer3standard
    MPEG2Layer3standard
    MPEG2.5Layer3standard
MaximumMP3folders: CD:255/USB:999
MaximumMP3les: CD:999/USB:999(eachfolder)
Dimensions:  320x112.6x340mm
Weight:  3.43kg
IM_RMP3_GB.indd 52 03.11.2009 09:18:45

Reloop RMP-3 Specifications

General

Brand	Reloop
Model	RMP-3
Category	Media Player
Language	English