Trigger preset samples, using the DRUM
PADS, from Serato‘s SP6 Sampler unit
When the sample slot is loaded, the drum
pad will light orange
When the sample slot is playing the drum
pad will blink
If the slot is empty, hit the drum pad to
load a sample from your current track
selection
The rst six drum pads are sample slots
1-6 of SP6
Drum buttons 7 and 8 are always lit blue
and switch through sample banks
next/previous
Pressing SHIFT + drum pad will eject a
sample if not playing (pad only lit)
SAMPLER mode button + drum pad
will stop an active playing slot
The Sampler Master volume can be
controlled with the Sampler volume knob in
the master section.
SHIFT + Pushing the sampler volume knob
will toggle through the outputs 1, 2, 3, 4
and M
SAMPLER MODE
+
<
<
To Next Page
Loading...
Need help?
General
