REMET CNC TECHNOLOGY SP. Z O.O.
Page 22 of 51
Manufacturer of machinery and equipment, machining
Setting the axis of cutting knives RS-120+PTO, RS-120 OFFROAD
If you move the blade axis relative to each other, do the following:
Step 1. Unscrew the M8 / M10 Allen screws by 3-5 mm from the upper part of
the clamping sleeve:
Step 2. Hit the bolts with great force until the lower part of the clamping sleeve
is unblocked, hit through a piece of thick sheet for even pressure and to avoid
damage to the bolts
To Next Page
