REMET CNC RS80 - 14 GUARANTEE CARD (Based on Proof of Purchase); Principles of the Warranty Guarante

REMET CNC TECHNOLOGY SP. Z O.O.
Page 50 of 51
Manufacturer of machinery and equipment, machining
14. GUARANTEE CARD (based on proof of purchase)
PRINCIPLES OF THE WARRANTY GUARANTE:
1. This device is provided with a 24-month limited warranty. In the case of use in
companies, commercial use and any other than private use, the warranty
period is shortened (12 month).
2. Damage caused by natural wear, overload or improper handling is excluded
from the warranty. Parts subject to natural wear are not covered by the
warranty.
3. Observe work instructions, tractor aggregation, inspection, cleaning,
maintenance, storage and transport for warranty service.
4. Damage caused by defects in material or workmanship will be removed free of
charge by delivery of new equipment or repair. The condition for using the
warranty service is to provide the complete unit with the purchase document
to the service center at the company's premises.
5. For warranty repairs are not eligible repair caused by:
- use of the chopper contrary to the instruction manual and intended use,
- random events or others for which the guarantor is not responsible
- when connecting the tractor to the tractor with a PTO shaft equipped with an
overload clutch (model RS-120+PTO).
6. The guarantor may not recognize the guarantee if it is found that:
- introducing modifications,
- the use of poor quality fuel,
- not using PTO shaft with clutch * (in RS-120 PTO)
- introducing design changes,
- damage caused by random events,
- lack of required information and records or their modification in the warranty
card,
- use of the chopper not in accordance with the operating instructions and
intended use.
7. Repairs not covered by the warranty may be ordered for payment from our
service center. Our Service Center will prepare a repair cost estimate. Only
devices that have been delivered in appropriate packaging and have been paid
for transport costs will be accepted for repair.
8. In the event of a warranty repair, please contact us
with the producer. There you can get further information about the complaint.
9. Disposal of the device is carried out free of charge.
Device symbol: ………………………………
Serial number: ………………………………………
Date of production: 202.…
Sale date: ……………………………………
Signature of the seller: …………….….………..… _______________________
stamp