EasyManua.ls Logo

Remington Compact Control HPL IPL3500 - Energy Levels and Treatment Techniques

Remington Compact Control HPL IPL3500
196 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Skin
Type
1
Body Hair
2
Area
Average
Treatment Time
Eectiveness of
Hair Reduction
I - V Brown to black
Lower/upper leg
Session 8 - 10
approx. 4 weeks
apart
70%
Arms 60%
Bikini line 70%
Underarms 65%
1
Skin types are based on the Fitzpatrick scale of skin colours. Refer to the skin colour chart at
the front of this manual (Fig 1).
2
Not eective on white body hair.
ENERGY LEVELS
The energy level determines the intensity of the light pulse delivered to your skin. As the
energy level increases, so do hair reduction results, as well as the risk of possible side eects
and complications.
The device has 5 levels of energy from 1 (the lowest) to 5 (the highest), represented by 5
energy level indicator lights.
When the device is turned on, the energy level is set to level 1 automatically. Only one
energy level indicator light will be on.
To change the energy level, press the control button repeatedly to increase the energy
level from 1 to 5. Once at level 5, press the control button again to reduce the energy
level from 5 back to 1.
To determine the right energy level for your treatment area, refer to section BEFORE
YOUR FIRST TREATMENT.
PULSING AND GLIDING
Pulsing is the best technique for working at higher energy levels.
Press the treatment window against your skin. Work in rows (either across or down as shown
in Fig 4). Start at one end of each row and progress to the other end. The treatment window
creates temporary pressure marks on the treated area so you can see areas you have treated.
After each pulse, move the treatment window to the next spot. Keep doing this pulsing
action for the area you are treating. Avoid gaps or overlaps as you use the device.
Gliding is the best technique for working at lower energy levels.
Press the treatment window rmly against your skin and slowly glide over your skin (either
across or down as shown in Fig 4). Make sure that the treatment window is always touching
your skin. At lower energy levels, the device takes only 1-1.5 seconds to recharge between
pulses. This generates a nonstop sequence of ashes. Glide at a speed so that you avoid
gaps or overlaps.
Do not treat the same area of skin more than once per hair reduction session.
Stop use immediately if you have any discomfort.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE

Table of Contents

Related product manuals