What does 'Replace Light Cartridge' mean on my Remington Hair Removal System?
The 'Replace Light Cartridge' message on your Remington Hair Removal System indicates that the light cartridge is either missing or needs to be replaced.
What to do if my Remington i-Light Hair Removal System is not turning on?
If your Remington Hair Removal System is not turning on, ensure it is plugged into a working electrical outlet. If it's plugged in, try switching to a different outlet to rule out any power supply issues.
Why do treated areas become red after using the Remington i-Light?
Redness after treatment with the Remington Hair Removal System is normal and should subside. If the redness persists, try using a lower light intensity during your next treatment.
Why is hair growing back after using the Remington i-Light?
It's normal for hair to begin to grow back after the initial treatment with the Remington Hair Removal System. For optimal results, repeat the treatment when you notice hair regrowth.
What to do if the Remington Hair Removal System doesn't flash when the button is pressed?
If the Bulb Status Indicator Light is green but your Remington Hair Removal System doesn't flash when you press the button, ensure the Skin Contact Sensor is making full contact with your skin. If it still doesn't work, try turning the unit off, waiting a few seconds, and then turning it back on to reset it.
Why is there a strange smell when using my Remington i-Light?
If you notice a strange smell while using your Remington Hair Removal System, make sure the treatment area is completely shaved before treatment.
What does it mean when the intensity LEDs are flashing in sequence on my Remington i-Light Hair Removal System?
If the Intensity LEDs are flashing in sequence on your Remington Hair Removal System, it indicates a malfunction. Turn the unit off, wait a few moments, and try again. If the problem persists, the unit should be returned for repair.
Why are all the LEDs flashing with a warning beep on my Remington i-Light?
If all LEDs are flashing with a warning beep on your Remington Hair Removal System, the nose cone is either removed or loose.
What to do if my Remington i-Light Hair Removal System is cracked or broken?
Do not use the Remington Hair Removal System if it is damaged. If you have concerns, discontinue use.
What does 'Not Full Contact' mean on my Remington i-Light Hair Removal System?
The 'Not Full Contact' message on your Remington Hair Removal System means the flash button was pressed while the skin contact sensor was not fully engaged.
Discusses expected results, hair reduction, and regrowth patterns after treatment.
Key safety instructions and advice before using the i-Light device.
Guidance on checking skin type suitability using the provided skin tone chart.
Lists specific body areas where the i-Light device should not be used.
Details conditions and situations where using the i-Light device is not recommended.
Essential safety instructions to reduce risks of burns, electrocution, fire, or injury.
Instructions on how to clean the device, including warnings about water and cleaning agents.
Guidance on device maintenance, specifically replacing the bulb cartridge.
Common problems and solutions for the i-Light device.
Guide to self-assessing skin type using a chart and scoring system.
A chart to assess skin's reaction to sun exposure based on different scores.
A chart to evaluate tanning habits and their impact on skin type assessment.
Table correlating total scores to Fitzpatrick skin types I-VI and usage recommendations.
Details the product's 2-year warranty, coverage, and exclusions.
General| Technology | Intense Pulsed Light (IPL) |
|---|---|
| Skin Tone Sensor | Yes |
| Body Attachment | Yes |
| Facial Attachment | Yes |
| Power Source | Corded |
| Treatment Area | Face and body |
| Energy Levels | 5 energy levels |
| Skin Tone Range | Suitable for fair to medium skin tones |
| Hair Color Suitability | Dark brown to black |
To Next Page