What to do if the chain does not get oil on my Remington Saw?
If the chain on your saw isn't getting oil, consider these potential causes: 1. The oil slot in the guide bar might be clogged; remove the guide bar and clean the oil slot. 2. The oil may be too thick; use the correct weight of oil. 3. For models with an automatic oiler, the vent in the oil cap might be clogged; remove the cap and clean the vent hole.
What to do if the Remington Saw chain comes off the guide bar?
If the chain is coming off the guide bar, it could be due to the following reasons: 1. The chain is loose, so you should tighten the chain. 2. The guide bar and chain may not be assembled correctly.
Why is my Remington Saw running slow and stalling easily?
If your saw runs slowly and stalls easily, it might be due to a low power supply voltage. Check if the extension cord wire size is too small.
General| Type | Electric Chainsaw |
|---|---|
| Power Source | Electric |
| Bar Length | 16 inches |
| Weight | 9.7 lbs |
| Voltage | 120 V |
| Chain Type | Low-kickback |
| Chain Pitch | 3/8 inch |
| Chain Gauge | 0.050 inch |
Basic safety precautions and checks before using the chain saw.
Essential safety guidelines to follow during chain saw operation.
Explanation of kickback, its causes, and potential for severe injury.
Information on built-in safety features designed to reduce kickback risk.
How proper maintenance influences kickback risk and overall safety.
Safety steps before servicing and general saw inspection guidelines.
Guidelines for maintaining the chain saw and storing it properly.
Steps for removing items from the carton and checking for shipping damage.
Diagrams illustrating parts of the RM1632A and RM1635W chain saw models.
Definitions of key terms related to chain saw parts and operations.
Step-by-step instructions for attaching the guide bar and chain to the saw body.
Procedure for properly tensioning the saw chain for safe operation.
Instructions for filling the chain saw's oil reservoir with appropriate oil.
How to oil the chain and maintain the automatic oiling system.
Guidelines for selecting and safely using extension cords with the saw.
Techniques for making safe and effective cuts with the chain saw.
Detailed steps for safely cutting down a tree, including preparation and procedure.
Instructions for safely removing branches from a fallen tree.
How to safely cut a log into sections, considering support and positioning.
Steps for cutting limbs from a living tree, ensuring proper technique.
How to properly clean the exterior of the chain saw.
Procedures for cleaning and maintaining the guide bar for optimal performance.
Instructions for sharpening the saw chain and its components.
Guidance on when and how to replace the saw chain.
Steps for storing the chain saw safely for extended periods.
Information on how to get service from authorized dealers.
A guide to diagnosing and fixing common issues with the chain saw.
Details of the product's limited warranty, coverage, and exclusions.
To Next Page