ZXT-800 AC/AV MASTER USER MANUAL
TIPS
1. User need at least Learn the OFF (Parameter Value 0), and one Temperature Mode
(Parameter Value 2 ∼ 28) to complete the usage model.
2. Keep away from Incandescent Light or Direct Sunlight during learning.
3. Make sure IR Transmitter of your Original Remote alight with learning diode of ZXT-
800, you may also slight adjust closer or further away the distance of two devices.
Some of Remotes the IR transmitter in hidden behind lens and may not installed
center of remote.
4. Make sure the power is good on both devices, especially the Original remote. Use
Fresh Batteries in both devices recommended. ZXT-800 will not implement the learn-
ing process if the battery level below 20%.
Continued on next page
CONTENTS [ 11 | 23 ]
To Next Page
