Need help?Do you have a question about the Remotec ZXT-800 and is the answer not in the manual?
Details the physical components and features of the ZXT-800, including sensors, ports, and indicators.
Lists the key features of the ZXT-800, such as Z-Wave thermostat functionality, IR database access, and learning capabilities.
Defines essential Z-Wave terminology like Device/Node, Inclusion, Exclusion, and different Z-Wave modes.
Explains how to power the ZXT-800 using batteries or USB, and how it determines its Z-Wave role.
Details procedures for including the ZXT-800 into a Z-Wave network using Classic or SmartStart inclusion methods.
Explains configuring the ZXT-800 to send status reports (temperature, battery) to the Z-Wave gateway.
Covers methods for setting up IR codes for controlling AC and AV devices via the gateway's configuration.
Details using the Conexum ZXT-800 app via Bluetooth for IR code setup for both AC and AV devices.
Explains how to use the IR learning function to capture IR data from original remote controllers for AC devices.
Details the process of learning AV IR codes using the ZXT-800 and the procedure for capturing commands.
Details FCC compliance statements and requirements for the ZXT-800 device, ensuring it meets regulatory standards.
Provides Industry Canada (IC) compliance information, including operational conditions and interference statements.
Lists important safety warnings regarding modification, fire risk, electrical shock, burns, and proper disposal of the unit.
Highlights cautions related to battery replacement risks, explosion hazards, and proper disposal of used batteries.
General| Type | IR Extender |
|---|---|
| Compatibility | Z-Wave |
| Protocol | Z-Wave |
| IR Carrier Frequency | 38 kHz |
| Dimensions | 110mm x 70mm x 24mm |
| Weight | 150 g |
| Operating Frequency | 868.42 MHz |
| Power Supply | 5V DC |
| Operating Temperature | 0°C to 40°C |
| Operating Range | Up to 30 m |
| Power Source | External Power Adapter |
To Next Page
