Rena Envelope Imager I - Character Set; Paper Sensor

RENA Address Printer
612s(Ei1)_Operations Rev: 4/25/03 33
CHARACTER SET
These are national character sets with their own special characters in
each language.
HEADXY CORRECT.
This function is used to correct manufacturing tolerances between the
print heads.
The resulting offset between the print nozzle areas of two adjacent
cartridges can be corrected horizontally.
XY = 12 for cartridges 1 and 2
XY = 23 for cartridges 2 and 3
The correction is carried out in 1/300 inch steps:
-24 –23 –22 –21 ... –2 –1 0 1 2 ... 21 22 23 24
PAPER SENSOR
If you want to print onto media containing black areas, you can
deactivate the paper light barrier while you are printing. To do this, you
must set a format size under Paper Size (an incorrect format size can
lead to printing outside the paper area).
With a deactivated paper sensor and a specified format size, the light
barrier is queried only at paper feed.
SETTING LOCKED
This function can be used to lock printer menu settings, so that many of
the computer software (escape) commands are ignored.
This setting is highlighted in the Set-D print-out by the characters “!!!“.
The active configuration status is shown on the display. The display text
Set1U means that configuration 1 is not locked (U for unlocked). The
display text Set1L means that configuration 1 is locked (L for locked).
If you are printing from a Windows program using a
Rena printer driver, this menu feature should NOT be locked.
Doing so will lead to operating and printing problems.
LOCAL LOCKING : Some menu features can be individually “local
locked” by pressing the AutoPL key while viewing the desired menu
feature. The printer will prompt you with “Local Lock? yes no”. In many
cases, it is acceptable to “local lock” the following menu features when
using a Windows program in conjunction with a Rena printer driver:
Paper Size (should always be local locked), Print Quality, Orientation
Doing so may be necessary if your Windows software is not capable of
selecting the appropriate print quality or orientation.
GG
GG