Rena Envelope Imager I - Page 46

RENA Address Printer
612s(Ei1)_Operations Rev: 5/12/03 46
Error message Description Solving the problem
TEST MACRO TOO LONG The user-defined test address is too
long
- Keep within maximum lenght.
BUFFER OVERFLOW !! Overflow of receive buffer. - Check connection to PC
RAM ERROR !!
VERIFY RAM
Error in RAM. - Replace CPU board
PROGRAM ERROR
MAKE DEFAULT RESET
Error in program execution - Perform Default Reset
- Reload firmware
UART TIMEOUT
CALL SERVICE
Error in UART component - CPU board may need to be
replaced.
DISPLAY TIMEOUT
CALL SERVICE
Error in accessing the display - Check cable connections
- Replace display unit
CHECK CARTRIDGE 1
START TO CONTINUE
Cartridge No. 1 is not inserted - Insert cartridge(s)
CHECK CARTRIDGE 2
START TO CONTINUE
Cartridge No. 2 is not inserted
CHECK CARTRIDGES1,2
START TO CONTINUE
Cartridges No. 1 and 2 are not
inserted
CHECK CARTRIDGE 3
START TO CONTINUE
Cartridge No. 3 ist not inserted
CHECK ALL CARTRIDGES
START TO CONTINUE
No cartridge inserted - Insert cartridges
CHECK THE CARTRIDGES
START TO CONTINUE
Some cartridges are not inserted - Insert cartridges
PRINTING ERROR
REPEAT LAST ADRESS
Serious fault - Replace control board