Renault CAPTUR 2024 - Exterior Lighting and Signals

EXTERIOR LIGHTING AND SIGNALS
2
Getting to know your vehicle - 127
Side lights
Turn the ring 2 until the symbol
is opposite the mark 3 .
This indicator light on the instrument
panel comes on.
Daytime running lights function
The daytime running lights are
activated automatically, without any
action on the stalk 1 , when the engine
is started and they are deactivated
when the engine is switched off.
Dipped beam headlights
Manual operation
Turn the ring 2 until the symbol is
opposite the mark 3 . This indicator
light on the instrument panel comes
on.
Automatic operation
(depending on the vehicle)
Rotate the ring 2 until the AUTO
symbol is aligned with the mark 3 : with
the engine on, the dipped beam
headlights switch on or off
automatically according to the exterior
light level, without any action on the
stalk 1 .
Depending on the vehicle, the dipped
beam headlights will appear
automatically after several sweeps of
the windscreen wiper blades.
Before driving at night,
check that the electrical
equipment is operating
correctly and adjust the
headlight beams (if your vehicle is
not carrying its normal load)
🡺131. As a general precaution,
check that the lights are not
obscured (by dirt, mud, snow or
objects being transported).
Main beam headlights
With the engine running and the
dipped beam headlights lit, push stalk
1 . This indicator light on the instrument
panel comes on.
To return to the dipped beam
headlights position, pull the stalk 1
towards you again.
"Raise lights during driving"
function
When the main beam headlights are
activated, the "Raise lights during
driving" function improves driver
visibility by automatically raising the