HEADLIGHTS, LIGHTS: REPLACING BULBS
6
366 - Practical advice
Exterior lighting: replacing bulbs
To replace LED bulbs,
consult an approved dealer.
Before replacing the bulb.
Identify its initial positioning in its
housing.
When changing the bulb.
The bulbs are under
pressure and may break
when replaced.
Risk of injury.
After changing the bulb.
To refit, proceed in the reverse order,
taking care not to damage the wiring.
Make sure:
– that the replaced bulb is put back in
place in its housing in the same
manner;
– that it is correctly locked;
– that the cover is clipped (if present).
Front headlights
Changing bulbs
Daytime running lights/side lights
1
Consult an approved dealer.
LED main beam headlights/dipped
beam headlights/direction indicator
lights
2
Consult an approved dealer.
Rear and indicator lights
LED side light/brake light
1
Consult an approved dealer.