Renault CAPTUR 2024 - Wheel Trims - Wheel

WHEEL TRIMS - WHEEL
6
360 - Practical advice
Remove it using the hubcap tool 1
(located in the tool kit) by engaging the
hook in the opening near the valve 2 .
To refit it, align it with the valve 2 .
Push the retaining hooks in fully,
starting on the side of valve A ,
followed by B and C , finishing at the
side opposite valve D .
Do not leave the tools
unsecured inside the
vehicle as they may be
projected during braking.
After use, check that all the tools
are correctly clipped into the tool
kit, then position it correctly in its
housing.
Risk of injury.