FRONT SEATS
2
Getting to know your vehicle - 55
Front headrests
To raise the headrest
Press the
2
button and pull the
headrest upwards to the height
required. Check that it is correctly
locked.
To lower the headrest
Press the button
2
and guide the
headrest down to the desired height.
Check that it is correctly locked.
To remove the headrest
Raise it to its highest position (tilt the
seatback backwards if necessary).
Press the button
2
and lift the
headrest to release it.
To refit the headrest
Check that the headrest rods are clean
3
.
Insert the headrest rods into the holes
1
(tilt the seatback backwards if
necessary). Lower the headrest until it
locks and press button
2
to adjust to
the desired height. Check that each
rod
3
is locked on the seatback.
The headrest is an
important safety
component: ensure that
it is in place and in the
correct position. The top of your
head should be in line with the top
of the headrest. The distance
between your head and section
A
should be as short as possible.
Front seats
Adjusting the seat position
To Next Page
Loading...
