FRONT SEATS
2
56 - Getting to know your vehicle
To move the seat forwards or back
Move the switch
1
forwards or
backwards or, depending on the
vehicle, lift and hold the handle
3
to
unlock the seat. Release the handle
once the seat is in the correct position
and ensure that the seat is locked.
To raise or lower the seat base
Move the switch
1
upwards or
downwards or, depending on the
vehicle, move the lever
4
as many
times as necessary upwards or
downwards to the desired position.
Adjusting the seatback
To tilt the seatback
Move the switch
2
forwards or
backwards or, depending on the
vehicle, lift the handle
5
and tilt the
seatback to the desired position.
Release the handle at the desired
position and make sure that it is
locked.
After making
adjustments, make sure
that the seatbacks are
correctly locked in place.
For safety reasons,
carry out any
adjustments while the
vehicle is stationary.
We would advise you not to
recline the seatbacks too far to
ensure that the effectiveness of
the seat belts is not reduced.
Nothing should be placed on the
floor (area in front of the driver) as
these objects may slide under the
pedals during sudden braking
manoeuvres, thus obstructing
their use.
Central armrest
(depending on the vehicle)
To adjust the position of the central
armrest
6
, slide it forwards or
backwards.
To Next Page
Loading...
