TYRE PRESSURE LOSS WARNING
3
Driving - 179
Fault message table
Indicator lights Messages Readings
comes on
Inflate tyres and init.
This indicates that tyre under-inflation or
puncture has been detected. Check and adjust
the pressure of the four tyres when cold and
reset the system.
flashes, then stays on
Check tyre press and init.
This indicates that the reset has been
unsuccessful. Check and readjust the tyre
pressure before re-launching the resetting
procedure.
flashes, then stays on, along with
the warning light
Check TPW
This indicates a fault in the system. Consult an
approved dealer.
flashes, then stays on
TPW not available
This indicates that an emergency spare wheel
different in size to the other four wheels has been
fitted to the vehicle. The system remains
unavailable until a wheel identical in size to the
other wheels has been fitted and the resetting
procedure has been carried out.
To Next Page