SEAT BELTS
2
62 - Getting to know your vehicle
The seat belt must be worn as close to
the body as possible. e.g. avoid
wearing heavy clothing, keeping bulky
objects under the belts, etc.
Locking
Unwind the belt slowly and smoothly
and ensure that the buckle
3
locks into
the catch
5
(check that it is locked by
pulling on the buckle
3
).
If the belt jams, allow it to return
slightly before attempting to unwind it
again.
If your seat belt is completely jammed,
pull slowly, but firmly, so that just over
3 cm unwinds. Allow it to return slightly
before attempting to unwind it again.
If there is still a problem, contact an
approved dealer.
Unlocking
Press the button
4
and the seat belt
will be rewound by the inertia reel.
Guide the belt.
Seat belt reminder
warning lights
This warning light appears on the
central display
A
when the vehicle
ignition is switched on and if the
driver's and/or front passenger's seat
belt(s) (if the passenger seat is
occupied) is not fastened.
Front seat belt reminder
With the doors closed, the graphic
6
is
displayed on the instrument panel for
approximately 60 seconds when the
vehicle ignition is switched on. This
informs the driver of the fastening
status of each of the front seat belts
every time:
– the doors are opened during driving
(vehicle speed above zero);
– a front seat belt is fastened/
unfastened.
Understanding the graphic
6
:
– symbol in green: seat belt fastened;
– symbol in red: the seat is occupied
and the seat belt is not fastened;
– symbol in grey: seat not occupied.
To Next Page
Loading...
