CHILD SAFETY
2
78 - Getting to know your vehicle
prevent the child seat from moving
in the event of a collision.
In the latter three cases check that
your child seat can be installed by
consulting the list of compatible
vehicles.
No modifications must
be made to the
originally-fitted restraint
system components:
seat belts, ISOFIX and seats and
their mountings.
Attach the child seat using the ISOFIX
locks, if equipped. The ISOFIX system
allows quick, easy and safe fitting.
The ISOFIX system consists of 2 rings
and, in some cases, a third ring.
The ISOFIX anchoring
points have been
exclusively designed for
child seats equipped
with the ISOFIX system. Never fit
a different type of child seat, seat
belt or other objects to these
fittings.
Check that nothing is obstructing
the anchorage points.
If your vehicle has been involved
in a road accident, have the
ISOFIX anchorage points
checked and replace your child
seat.
Before using an ISOFIX
child seat that you
purchased for another
vehicle, check that its
installation is authorised. Consult
the list of vehicles which can be
fitted with the seat with the
equipment manufacturer.
The two rings are located behind the
zip fasteners
1
between the seat back
and seat base and are identified by a
mark.
The third ring
4
is used to attach the
upper strap on some child seats.
2
on
some child seats.
Rear seats
To Next Page
Loading...
