1
NU747_1_G1-FRA.qxd 17/02/05 9:25 Page 1.93
BC85 - NU747-1
C:\Documentum\Checkout\NU747_1_T1-ENG.win 3/3/2005 11:54
-page99
1.93
EXTERIOR LIGHTING AND SIGNALS (continued)
Switching off the lights
Manual operation
There are three options (depending
on the vehicle):
-return stalk 1 to its original
position;
- the lights go out when the engine
is stopped, when the driver's door
is opened or when the vehicle is
locked. In this case, the next time
the engine is started the lights will
be switched back according to the
position of the stalk 1.
- a timer will switch off the lights
automatically.
Automatic operation (depending
on vehicle)
The lights go out when the engine is
stopped, when the driver's door is
opened or when the vehicle is
locked.
Lights on warning buzzer
If the lights are switched on after the
engine is switched off, a warning
beep sounds when the driver's door
is opened to warn you that the lights
are still on.
To Next Page
Loading...
