1
4
4
NU747_1_G2-FRA.qxd 12/01/05 14:47 Page 2.37
BC85 - NU747-1
C:\Documentum\Checkout\NU747_1_T2-ENG.win 23/2/2005 16:21
- page 37
2.37
AUTOMATIC GEARBOX (continued)
Driving in automatic mode
Place the lever 1 in the D position.
In most traffic conditions, you will
not have to touch the gear selector
lever again: the gear will change
automatically at the right time and
at the most suitable engine speed
because the automatic system takes
into account the vehicle load and
road contour and adjusts itself to
the particular driving style you have
chosen.
You may at any time modify the gear
selected automatically by using the
paddles 4. The display will show
the new gear engaged for a few
seconds on the instrument panel,
then return to D.
If the gear is not authorised, it will
flash.
How to drive as economically as
possible
Leave the selector in position D on
the open road, depress the
accelerator pedal slightly to ensure
automatic gear changes at
comparatively low engine speeds.
To Next Page
Loading...
