2
1
5
4
3
NU747_1_G5-FRA.qxd 12/01/05 14:51 Page 5.27
BC85 - NU747-1
C:\Documentum\Checkout\NU747_1_T5-ENG.win 3/3/2005 11:57
-page27
5.27
WINDSCREEN WIPER BLADES
Replacing windscreen wiper
blades 1
- lift wiper arm 3,
- turn the blade 1.
Special note for driver's side: stop
turning before the blade touches the
bonnet.
Lower tab 2.
Push the blade forwards to
disengage the hook 4.
Clean your windscreen and your
rear screen regularly.
To refit
To refit the wiper blade, proceed in
reverse order to removal. Make sure
that the blade is correctly locked in
position.
• In frosty weather, make
sure that the wiper
blades are not stuck by
ice (risk of motor
overheating).
• Monitor the condition of the
blades. Replace the wiper
blades as soon as they begin to
lose efficiency (approximately
onceayear).
To Next Page
