1
3
2
4
A
NU747_1_G1-FRA.qxd 17/02/05 9:23 Page 1.39
BC85 - NU747-1
C:\Documentum\Checkout\NU747_1_T1-ENG.win 3/3/2005 11:53
-page45
1.39
CHILD SAFETY (continued)
Fitting the child seat seat base
- For information on fitting and
using the seat, read the
instructions provided carefully.
- Attach mounting guide 2
(supplied with the child seat or
as an accessory), to rings 1 fitted
to the seat.
- Slide the seat latches 3 into the
guides 2 and push the seat hard
to lock it onto the rings;
- Check that the seat is locked
correctly by moving it from left to
right and then forwards and
backwards.
- Push firmly on the base to bring
the child seat frame (if fitted) into
contact with the seatback.
Fitting the child seat seatback
A rear-facing Isofix seat fitted to the
front passenger seat
The front passenger seat must be
adjusted so that the back of the child
seat is touching the dashboard.
Use belt 4 supplied with the seat:
- fix the belt hook to the ring A
located under the seat and marked
by a label;
- Tighten the belt
To Next Page
Loading...
