A
3
NU747_1_G1-FRA.qxd 17/02/05 9:23 Page 1.46
BC85 - NU747-1
C:\Documentum\Checkout\NU747_1_T1-ENG.win 3/3/2005 11:53
-page52
1.46
CHILD SAFETY (continued)
Adjusting the headrest height
Press button A on the control 3,then
raise or lower the headrest.
To set the headrest in the storage
position:
Press button A on the control 3 at
thebaseoftheheadrestrodand
lower the headrest completely until
it is in contact with the seatback.
This setting gives the driver
maximum rear visibility.
The completely lowered headrest
position is a storage position: it
should not be in this position when
a passenger is occupying the seat.
The headrest is a safety
component; check that it
is present and correctly
adjusted.